How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to add a second key. This requires the use of a handheld computer called Tech-2, to be used by the dealer. Then the transponder must be replaced and a key have to be purchased.
It is recommended to rotate your keys in order that one does not get worn out more quickly than the other. This will keep your keys in good condition.
Replacement Case
The new key fobs for keys are not like the old Saab keys. how to get a saab replacement key are equipped with electronics which make it hard to copy. This has made stealing cars much more difficult than twenty years ago. It also makes it more expensive to replace keys lost.
Every owner of a 9-3 Saab should have at least two working keys. If one of them is lost, it is expensive to replace it in the car since it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers typically charge between $100 and $200 to complete this.
There are several ways to get around these expensive. Some parts retailers will look up the code on a spare key (usually the same one that opens the doors and switches the ignition) and cut a new metal key blade at a fraction of the dealer's cost. The key, however, must be the same as the original one to function properly in your vehicle.
You can also change the case yourself by following these steps. You'll need a flathead screwdriver along with some patience. With the screwdriver you can pull apart the plastic and remove the emergency key. Once the case has been opened remove all electronics and place them in your new case. Be sure to put the correct badge and key back in the case too.
Replacement Battery
The replacement battery for the Saab 9-3 is a cheap component that can be replaced quickly and easily. This YouTube DIY video user Cyclone Cyd explains how to replace the battery of the remote key fob in just four steps. This guide should work with any modern saab key fob although the process might differ slightly.
This button is usually placed next to the Saab logo on the back of the fob. This button is usually located on the back of the fob, next to the Saab Logo. Next take the flathead screwdriver to insert into the tiny hole in this button. This will allow you to open the case of the fob so that you can replace the battery.
After the new battery CR1632 is in place it is possible to reassemble the remote key fob. You can then program it to your car. The procedure should take no more than an hour or less. It is a very simple process that does not require any special tools.
The process is more complicated if you lose the key, but it's possible. The dealer will need to read the car's VIN and then request a replacement key blade and TWICE module, both with the correct unique code. After that, they will have to cut the replacement key and then program it using the latest software tool known as MDI.
Replacement Key Fob
The key fob is equipped with a battery that is used to lock and unlock your car. Batteries have a finite lifespan and will eventually die. It's a common issue in all vehicles. The good thing is that you can change the batteries in most key fobs, without having to replace the entire case. You can purchase fobs replacements on Amazon that have all the electronics already installed, so you'll be able to simply open the case and replace the old batteries. It is important to remember that you'll need take out the emergency key first. you can accomplish this by inserting the small screwdriver flathead into the slot that is located in the middle of the case. The case should split when you rotate the screwdriver around it.
If you are about to replace your keys, make sure you have spare keys, as this can reduce the total cost by a substantial amount. If you have an extra key, you can request the dealer to cut it and program it for your car. This is less expensive than purchasing a brand new key fob.
If you don't have a spare, it is possible to add a second key to your car, however this requires a lot research and effort. It costs around a hundred dollars to add a second car key. The computer in the vehicle must also be programmed. This can be accomplished by a professional, however it's a costly option for most owners.
Replacement Ignition
The latest SAAB 9-3 features a more sophisticated alarm system based on a key code. If you lose your only key, it could be costly to purchase a new one since the car needs to be equipped with a specific computer and also be programmed to accept a brand new key. The majority of locksmiths aren't able to do this and even dealers can charge several hundred dollars just to program the new key!
If you've lost your sole working key, a dealer will repair the computer in your car (known as the CIM or SAAB TWICE) to make a replacement, and they will charge you a premium price for it. We can reprogram the EEPROM on your car's computer to make it ready for an additional key. This will save you more than 50% of what you would have to pay an auto dealer.
If you've owned a car like the SAAB 9-3 for many years and you're aware of the ignition keys are not very durable. They can get extremely sticky, and the buttons are known to be ripped off from time to time It is recommended that you consider buying a new one if the one you have isn't working as it should. It's not as difficult as you think to replace the ignition key. With the right tools, it can be done quickly.